| Filename |
Description |
File Size |
| SetaCheck-SA5550-0.pdf |
No description |
0P |
| SetaVap4_80600-2.pdf |
No description |
0P |
| 99580-0_Conductivity-Stick-1.pdf |
No description |
0P |
| JetDC-88500-0-1.pdf |
No description |
0P |
| 35300-0_C-92_Cleveland_Flashpoint.pdf |
No description |
0P |
| 94165-0_SetaCool_20.pdf |
No description |
190K |
| 94158-0_SetaCool_12.pdf |
No description |
193K |
| 94155-0_SetaCool_4.pdf |
No description |
135K |
| In-Line-Conductivity-Sensor-1.pdf |
No description |
905K |
| H2S-SA4000-4-2.pdf |
No description |
0P |
| Seta-Oil-Arbiter-CM1000-0.pdf |
No description |
157K |
| AvCount3-for-Skydrol-SA1105-0-3.pdf |
No description |
0P |
| AvCount3-SA1100-0-4.pdf |
No description |
0P |
| Series_3e-2022.pdf |
No description |
622K |
| 91600-4_Multi_Filtration_Tester.pdf |
The Seta Multi Filtration Tester (MFT) is a fully automated instrument, designed to test the Filter Blocking Tendency (FBT) of diesel, biodiesel (B100 & B5/7/20/30), gas oil, gas turbine fuel and kerosene. |
1M |
| 94160-0_SetaCool_16-1.pdf |
No description |
358K |
| 11405-0_Silver_and_Copper_Corrosion_Bath.pdf |
The Seta Silver and Copper Corrosion Bath is a bench top, stainless steel water or oil bath. Digitally controlled to ±0.1 °C over a temperature range of ambient +5 °C to 150 °C. |
223K |
| Series-8-2022.pdf |
No description |
2M |
| 11200-8_Rust_Prevention_Test_Bath.pdf |
The Seta Rust Prevention Bath allows determination of the ability of steam turbine oils to prevent rusting of ferrous components and to test the corrosive properties of cargoes in petroleum product pipelines. |
174K |
| 93531-8_Cloud_and_Pour_Point_Cryostat.pdf |
The Seta Cloud and Pour Point Cryostat has four 2 litre compartments which are independently temperature controlled and can accommodate four Air Wells. Three compartments have a temperature range of ambient to -34 °C and one has a low temperature compartment -34 to -51 °C. |
327K |
| 94710-4_KV-2_Low_Temp_Viscometer_Bath.pdf |
The Seta KV-2 is a two place low temperature viscosity bath designed to achieve ultra-high stability in the temperature range of +20 °C to -40 °C. The bath offers high stability of and ±0.01 at -20°C. |
365K |
| AvCount-Lite-for-Skydrol-SA1805-2-3.pdf |
No description |
0P |
| AvCount-Lite-SA1800-2-5.pdf |
No description |
0P |
| Series_3-2022-1.pdf |
No description |
2M |
| SA5500-0_SetaCheck.pdf |
SetaCheck Biodiesel is a handheld instrument designed to provide fast, accurate and repeatable on-site measurement of biodiesel content in diesel fuel blends. |
364K |
| Thermometers.pdf |
No description |
284K |
| Seta-Penetration-Cones.pdf |
No description |
317K |
| Sampling-Cans.pdf |
No description |
229K |
| Seta-Penetration-Needles.pdf |
No description |
177K |
| 13220-2_Semi-Automatic_Tag_Flash_Point_Tester.pdf |
The Seta Semi-Automatic Tag Closed Cup Flash Point Tester consists of a stainless steel case in which is mounted an electrical heater to heat a test cup, liquid bath and the lid and shutter assembly. |
242K |
| 16120-2_Setaclean_Total_Sediment_Tester.pdf |
The Setaclean Total Sediment Tester is a compact bench-mounted unit for determining the insoluble material content of distillate and residual fuel oils. |
352K |
| 70200-0_Dry_Ice_Maker.pdf |
Dry ice/liquid mixtures can produce temperatures down to -78 °C. Seta dry ice makers are a safe, efficient and convenient method of producing pellets and blocks in a range of sizes. |
103K |
| 22100-0_Pressure_Hydrometer_Apparatus.pdf |
Pressure hydrometer apparatus for determining the density or specific gravity of light hydrocarbons including LP gases. |
117K |
| MTVM-Reference-Standards.pdf |
No description |
171K |
| Viscosity_Standards.pdf |
Viscosity Standards |
94K |
| STVM.pdf |
STVM Range |
115K |
| Hydrometers.pdf |
No description |
118K |
| Existent-Gum-1.pdf |
No description |
0P |
| 19610-4_Water_Washout_Tester.pdf |
The Seta Water Washout Tester is used to evaluate the resistance of a lubricating grease from a bearing to washout by water. |
74K |
| 19722-0_SSAFlab_Filtration_Kit.pdf |
SSAFlab Filtration Kit for the determination of particulate contamination in aviation fuels. |
276K |
| 19724-0_Filtration_System.pdf |
Filtration system for testing middle distillates in accordance with ASTM D6217 and IP 415. |
276K |
| 93700-0_Refrigerator.pdf |
Laboratory refrigerator for safe cooling and chilled storage of volatile products. The refrigerator is of approved design with all electrical components being isolated from the interior of the cabinet to reduce fire risk from internal vapours. |
117K |
| 16670-0_Oxi_Solid_Block.pdf |
The Seta Oxi Solid Block Bath is an aluminium block bath with digital temperature control that has been designed to accept up to four oxidation vessels for carrying out tests equivalent to the IP 40 test method. |
242K |
| 17190-3-Penetrometer.pdf |
A semi-automatic penetrometer with a range of 0 to 640 Pen (64 mm). |
136K |
| 15250-4_Lovibond_Colour_Comparator.pdf |
The Seta-Lovibond Colour Comparator is used for visual determination of the colour of oils and petroleum waxes. Readings calibrated in accordance with ASTM D1500. |
123K |
| 15320-2_Seta_Lovibond_Colorimeters.pdf |
The Seta Lovibond High Precision Colorimeter provides determinations in Saybolt Colour, ASTM colour, Pt-Co / Hazen / APHA colour, Gardner, Lovibond RYBN, IP units, CIE values or spectral data. |
133K |
| 90200-5_Water_Bath.pdf |
15 litre capacity stainless steel water bath with Thermostir 120 unit mounted on top for pre-heating samples, can be used as an alternative to Seta Block Heater (90300-2). |
143K |
| SA4032-0_H2S_PT_Scheme.pdf |
Support analytical competency and compliance with ISO 17025 recommended practice in IP 570/14a. Validation of apparatus performance is stated as a mandatory requirement at least every three months in IP 570/14a. |
203K |
| 16155-5_Fuel_Oil_Ageing_Bath.pdf |
The 12 litre capacity Fuel Ageing bath is a stand-alone bench top instrument comprising 6 air wells and a thermostir unit. The thermostir unit includes a digital temperature controller, circulator, heater and LED display. |
152K |
| 14020-8_Dual_Twin_Foam_Test_Baths.pdf |
The Seta Dual Twin Foam Test Baths detect undesirable foaming characteristics in lubricating oils, which could cause inadequate lubrication, overflow and cavitation. The instrument comprises a high temperature (normally 93.5 °C) and a low temperature (normally 24 °C) bath, each with the capacity to hold four 1000 ml graduated glass cylinders. |
181K |
| FIJI-SA5100-0-SA5200-0-3.pdf |
No description |
0P |
| 19400-5_Roll_Stability_Tester.pdf |
The Seta High Temperature Roll Stability Tester is used for shear stability testing lubricant greases by simulating the effect of squeezing grease between the rollers and the outer face of a roller bearing. |
224K |
| 24415-3_Distillation_Flask_Heater.pdf |
The Seta Distillation Flask Heater is a regulated heating mantel, which has the capacity to accommodate a 1000 ml flask. It is a general purpose heating mantel designed for laboratory procedures that require precise temperature control. |
99K |
| 24410-5_Distillation_Flask_Heater.pdf |
The Seta Distillation Flask Heater is a regulated heating mantel, which has the capacity to accommodate a 500 ml flask. It is a general purpose heating mantel designed for laboratory procedures that require precise temperature control. |
99K |
| 19650-0_Dual_Water_Washout_Tester.pdf |
The Seta Dual Water Washout Tester estimates the resistance of lubricating greases to water washout from ball bearings according to ASTM D1264, DIN 51807-2 and ISO 11009. |
171K |
| 16645-2_Seta_TOST_Bath_6_Way.pdf |
The Seta TOST Bath is a compact solid block bath which can accept up to 6 sets of oxidation glassware and is suitable for TOST tests and as an alternative to liquid filled baths. |
170K |
| 16640-2_Seta_TOST_Bath_12_Way.pdf |
The Seta TOST Bath is a compact solid block bath which can accept up to 12 sets of oxidation glassware and is suitable for TOST tests and as an alternative to liquid filled baths. |
157K |
| AvCount-Lube-SA1900-0-2.pdf |
No description |
0P |
| 99700-6_Salt_In_Crude.pdf |
The Seta Salt in Crude Analyser is a robust and portable instrument for determining the chloride (salt) content of crude oils in full conformity to ASTM D3230, IP 265 and equivalent test methods. |
581K |
| 16900-7_Oxidation_Bath_with_Oxflo_Controller.pdf |
The Seta Oxidation Bath is used for quantative analysis of the tendency of oils and fuels to form sludge, acids and deposits when exposed to oxygen in the presence of metallic catalysts over extended periods. |
157K |
| 15452-2_Auto_Oxi_Control_System.pdf |
The Seta Auto-Oxi control system provides automatic monitoring of up to four pressure test vessels and is designed for use with all water or dry block temperature baths that conform to the test method specifications. |
638K |
| Herschel-Brochure.pdf |
No description |
0P |
| 91670-2_Cold_Filter_Blocking.pdf |
The Seta CFBT is a small scale laboratory analyser which measures the Cold Filter Blocking Tendency (CFBT) of diesel and gas oils. |
183K |
| 15840-0_Air_Release_Value_System.pdf |
The Seta Air Release Value System is designed to determine the air release properties of hydrocarbon based oils in accordance with ASTM, IP and other methods. |
1M |
| SA6000-0_AFIDA-2.pdf |
No description |
0P |
| WSI-2024.pdf |
No description |
0P |
| 11310-0_Copper_Silver_Corrosion_Bath.pdf |
The solid block bath is specifically designed for measuring thin silver strip corrosion to ASTM D7667 and copper corrosion to ASTM D130. |
204K |
| 19450-0_Roll_Stability_Tester.pdf |
High Temperature Roll Stability Tester with adjustable speed controller (100 to 200 rpm) for shear stability testing lubricant greases by simulating the effect of squeezing grease between the rollers and the outer face of a roller bearing. |
224K |
| 97400-3_Micro_Carbon_Residue_Tester.pdf |
The Micro Carbon Residue Tester is an automatic airtight furnace that is pre-programmed to run tests to determine Micro (Conradson) Carbon residue of petroleum products. The digitally controlled furnace has a temperature range of ambient to 500 °C. |
415K |
| 90100-0_Centrifuge.pdf |
The Seta Oil Test Centrifuge is a heated chamber centrifuge used to determine water and sediment in oils. The large diameter chamber, with six place rotor and cushioned adaptors allows the use of 6 and 8 inch conical, pear-shaped, trace sediment and 12.5 ml tubes. |
361K |
| 35000-0_PM-93_Flashpoint-2.pdf |
No description |
0P |
| FIJI-SA5000-2-2.pdf |
No description |
0P |
| 15550-3_Oxi_Cor_Bath.pdf |
The Seta Oxi-Cor bath is a stainless steel water or oil bath with four test stations. Temperature controlled by a top mounted thermostir circulator with integral over-temperature and low fluid level protection devices. |
206K |
| 22210-4_Reid_Vapour_Pressure_Bath.pdf |
The Seta Reid Vapour Pressure Bath is a floor standing water bath specifically designed for the determination of vapour pressure with Seta Reid or Seta Vapour pressure cylinders. |
141K |
| 15260-4_Seta_Lovibond_Colorimeters.pdf |
An automated spectrometric colorimeter designed for rapid colour analysis of petrochemical products. Selectable for Saybolt, ASTM, Pt-Co/Hazen/APHA, spectral data and CIE colour determinations. |
133K |
| 90000-3_Centrifuge.pdf |
The Seta Oil Test Centrifuge is a heated chamber centrifuge used to determine water and sediment in oils. The large diameter chamber, with four place rotor and cushioned adaptors allows the use of 6 and 8 inch conical, pear-shaped, trace sediment and 12.5 ml tubes. |
361K |
| 70220-3_Portable_Dry_Ice_Maker.pdf |
Dry ice/liquid mixtures can produce temperatures down to -78 °C. Seta dry ice makers are a safe, efficient and convenient method of producing pellets and blocks in a range of sizes. |
103K |
| 11308-0_Copper_Corrosion_Block_Bath.pdf |
A precision, processor controlled, block heater bath. Supplied with four test wells and designed to take copper corrosion test tubes. The heater has a temperature range of ambient to 200 °C. |
168K |
| 90300-2_Block_Heater.pdf |
A processor controlled heater you can use in conjunction with the Block for Seta Block Heater (90301-2, not included). The heater has a temperature range of 15 to 130 °C. |
200K |
| 81000-2_Setavap2.pdf |
The Setavap 2 vapour pressure tester is used for the measurement of gasoline, solvents, light crude oils, and similar products, using the “Mini” method. |
2M |
| Reference-Materials-lo.pdf |
No description |
0P |
| 16990-2_Freezing_Point_Apparatus.pdf |
Comprises sample tube, paddle, unsilvered flask, cork stopper/thermometer support, and an insulated metal case with a viewing slot. |
146K |
| 70210-0_Major_Dry_Ice_Maker.pdf |
Dry ice/liquid mixtures can produce temperatures down to -78 °C. Seta dry ice makers are a safe, efficient and convenient method of producing pellets and blocks in a range of sizes. |
103K |
| 16160-2_SSAFCON_sampler.pdf |
SSAFCON is a unique monitoring system for portable line sampling of aviation turbine fuel, to determine particulate contamination and colour ratings. |
345K |
